We start off with a pre-wash to encapsulate and emulsify the dirt then rinse, this is followed by a thorough hand wash, we use a high gsm plush microfiber and fold it twice effectively giving us 8 clean sides, as we wash the car we use a fresh clean side for every panel ensuring no dirt scratches the paintwork, we work down the panel so there no dirt brought up from the most dirty bottom area. once done with the panels we get to the finer details like around the windows, grill area, and mirrors with a soft bristle brush, then we rinse and spray the wheels with chemical to start dissolving all that break dust and dirt, rinse to remove dirt and reapply wheel cleaner, we start brushing the wheel face and the tire and then move on to the long brush for the barrel and arches, then we move the car and get the wheel lugs, corners and brake caliper with a small brush then rinsed, we move onto the decontamination stage, using a clay bar and clay lube to get all the embedded brake dust and iron. once completed we can prep the paint with an alcohol solution, this is to remove any waxes or sealants that remain. On to the paint correction, we use a dual action polisher with a microfiber pad for the most cut and a one step hybrid compound polish, we found this produces the best result. we apply the polish to the pad and spread it out on a panel, as we work we move the polisher one inch per second in a cross hash pattern overlapping each pass, once finished we prep the paintwork again to apply your chosen coating(1 year graphene included) and 3 month tyre shine is applied